CFGTD - 43240 EPON RESIN 828
- MSDS: CFGTD
- Manufacturer: SHELL OIL CO
- Product Name: 43240 EPON RESIN 828
- National Stock Number: 8040-00-040-5986
Product Identification
Product ID:43240 EPON RESIN 828
MSDS Date:09/10/1995
FSC:8040
NIIN:00-040-5986
MSDS Number: CFGTD
Responsible Party
HOUSTON, TX 77210-5000
US
Emergency Phone: 713-473-9461/713-241-4819
Info Phone: 713-241-4819/713-473-9461
Preparer: J C WILLETT
Cage: SHELO
Contractor
Telephone: 800-231-6950
Cage: 54527
Ingredients
BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820,
CAS: 25068-38-6
RTECS: KD4380000
Fraction By Weight: <100%
DIGLYCIDYL ETHER (DGE) (HUMAN CARCINOGEN BY ACGIH) *97-2*
CAS: 2238-07-5
RTECS: KN2350000
OSHA PEL 2.8 MG/CUM
ACGIH TLV: 0.53 MG/CUM
PHENYL GLYCIDYL ETHER-PGE (SUSPECTED ANIMAL CARCINOGEN BY
CAS: 122-60-1
RTECS: TZ3675000
OSHA PEL 60 MG/CUM
ACGIH TLV: 6.1 MG/CUM
Hazards
LD50 LC50 Mixture:ORAL LD50(RAT): 11.4 G/KG
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYES: MAY CAUSE MODERATE IRRITATION &
THERMAL BURNS. SKIN: MAY CAUSE MODERATE IRRITATION, SENSITIZATION &
THERMAL BURNS. INGESTION: LOW ORDER OF ACUTE ORAL TOXICITY.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, RASHES, HIVES.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN & EYE DISORDERS,
PRE-EXISTING SKIN/LUNG ALLERGIES.
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR 15 MINS. IF CONTACT IS
W/HOT PRODUCT, IMMEDIATELY FLUSH W/COOL WATER FOR 15 MINS. SKIN:
WIPE EXCESS. FLUSH W/WATER, FOLLOWED BY WASHING W/SOAP & WATER. IF
CONTACT IS W/HOT PRODUCT, IMMEDIATELY FLUSH W/COOLWATER FOR 15
MINS. IF CLOTHING IS STUCK TO BURN AREA, DON'T PULL IT OFF, CUT
AROUND IT. COVER BURN AREA W/A CLEAN MATERIAL. (SEE SUPP)
Fire Fighting
Flash Point Method:PMCC
Flash Point:480F
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CO2.
Fire Fighting Procedures:WEAR A POSITIVIE PRESSURE NIOSH APPROVED SCBA,
HELMET W/FACE SHIELD, BUNKER COATS, GLOVES & RUBBER BOOTS. COOL
FIRE EXPOSED CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:MATERIAL WILL NOT BURN UNLESS PREHEATED.
HEATING RESIN >300F IN PRESENSE OF AIR MAY CAUSE SLOW OXIDATIVE
DECOMPOSITION.
Accidental Release
Spill Release Procedures:LARGE: WEAR RESPIRATOR & PROTECTIVE CLOTHING
AS APPROPRIATE. SAFELY SHUT OFF SOURCE OF LEAK. DIKE & CONTAIN.
REMOVE W/VACUUM TRUCKS/PUMP TO STORAGE/SALVAGE VESSELS. SOAK UP
RESIDUE W/AN ABSORBENT & DI SPOSE OF PROPERLY. (SEE SUPP)
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. KEEP AWAY
FROM OPEN FLAMES & HIGH TEMPS. EMPTY CONTAINERS CONTAIN HAZARDOUS
PRODUCT RESIDUES.
Other Precautions:HANDLE EMPTY CONTAINERS IAW/HAZARD POTENTIAL OF
CURING AGENT(S) USED. AVOID CONTACT W/EYES. AVOID
PROLONGED/REPEATED CONTACT W/SKIN. DON'T BREATHE FUMES.
Exposure Controls
Respiratory Protection:NOT ORDINARILY REQUIRED. WEAR A NIOSH APPROVED
ATMOSPHERE-SUPPLY/AIR-PURIFYING RESPIRATOR FOR ORGANIC VAPORS.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:OTHER CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. DISCARD CONTAMINATED LEATHER ARTICLES/SHOES. WASH AFTER
HANDLING.
Supplemental Safety and Health
FIRST AID: INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN IF BREATHING IS
DIFFICULT. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN ALL CASES. SPILLS: FLUSH AREA W/WATER TO REMOVE TRACE
R ESIDUE. SMALL: TAKE UP W/AN ABOSRBENT MATERIAL & DISPOSE OF
PROPERLY.
Chemical Properties
Boiling Pt:B.P. Text:>500F
Vapor Pres:0.03
Spec Gravity:1.17
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VERY LIGHT YELLOW, VERY VISCOUS LIQUID.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS/MINERAL ACIDS, STRONG MINERAL &
ORGANIC BASES, PRIMARY & SECONDARY ALIPHATIC AMINE
Stability Condition to Avoid:HEATING >300F, HIGH TEMPS & OPEN FLAMES.
Hazardous Decomposition Products:BY COMBUSTION/ELEVATED TEMPS: CO,
ALDEHYDES, ACIDS, OTHER ORGANIC SUBSTANCES.
Conditions to Avoid Polymerization:HEATING >500F.
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.